VER 1.4.9.00
2015年5月27日
PFX2512 / BPC3000
Resolved issues
Fixed a problem that was causing the start of the next test to be held until the stop time expires even when the test itself has stopped earlier.
Resolved issues
Expanded the measurable temperature of the PFX thermometer from down to -40°C to down to -50°C.
Improvement
Updated the model ID profile to suppress the disparity between electronic load devices.
VER 1.4.8.01
2014年10月6日
BPC3000
Resolved issues
Fixed a problem with the IT functionality not operating correctly.
Resolved issues
Fixed a problem that was preventing the 0.1 mV and 0.1 mA accuracies from being achieved in high-speed sampling mode.
Improvement
Fixed so that VISA resources LAN and GPIB can be selected in addition to serial.
Resolved issues
Fixed other problems.
VER 1.4.7.97
2013年7月9日
BPC3000
Resolved issues
Changed the description of the chamber connection method in the operation manual.
VER 1.4.7.94
2013年6月6日
BPC3000
Improvement
Improved the update feature so that users using special-order products can also continue to use their environment
VER 1.4.6.83
2013年3月10日
PFX2512 / Test Executive / Test Condition Editor / GraphViewer
Resolved issues
Fixed the overshoot that was occurring the first time the PAT output was turned on.
Resolved issues
Fixed an error in the default current control method of pattern charge/discharge.
Improvement
Added a default time-based monitoring feature for pattern charge/discharge.
Resolved issues
Fixed a problem in the handling of the limit current in CP charge/discharge.
Improvement
Added support for 2-port LAN.
Improvement
Added a feature that saves the manually input IP address.
Resolved issues
Fixed an error in the CV value for CC-CV charge and CC-CP discharge in the profile master.
Improvement
Optimized the profile master.
Resolved issues
Fixed a problem that was causing incorrect processing when the edit button was processed if the profile master was empty.
Resolved issues
!!!DELETE!!!
Resolved issues
Fixed a problem that was causing the extension of life text file names to be changed.
VER 1.4.3.57
2013年1月31日
Test Executive
Resolved issues
Fixed a problem that was preventing current graphs greater than or equal to 50 A from being displayed.
VER 1.4.2.56
2013年1月8日
BPC3000 / Test Condition Editor / IO Config / Test Executive
Improvement
Added model ID 7119.
Resolved issues
Fixed a problem that was causing the application to close when model ID 7114 was selected.
Improvement
Prohibited the voltage range to be switched from IoConfig.
Resolved issues
Fixed a problem in which the extension of life result file names was lacking the dot.
Improvement
Changed the default chamber humidity setting to -1.
Resolved issues
Fixed a problem that was causing the low voltage range to return to high when a re-test was performed.
Resolved issues
Fixed an error in the updating of the test condition grid of TestExecutive.
VER 1.4.1.36
2012年11月2日
BPC3000
Resolved issues
Fixed a problem that occurred when the chamber humidity was not set.
Resolved issues
Added model ID 7114.
VER 1.4.0.35
2012年10月22日
BPC3000 / PFX2512
Improvement
Added an English help document.
Resolved issues
Fixed a problem in the trigger specification of pattern profiles.
VER 1.3.6.33
2012年8月22日
GraphViewer / Test Condition Editor
Resolved issues
Fixed a problem that failed to show two profiles in the maximum and minimum displays of the cell voltage.
Resolved issues
Fixed a problem that was causing the time to drift when the cell voltage was expanded time-wise.
Resolved issues
Fixed a problem with the VI cursor movement.
Resolved issues
Fixed a problem with the total number of steps in patterns.
VER 1.3.3.28
2012年7月20日
GraphViewer / PFX2512
Resolved issues
Fixed a problem with the processing of the Next button when option board data was displayed.
Resolved issues
Fixed a problem that was causing an exception when a BPCG3 file was opened directly and the content was zoomed.
Resolved issues
Fixed a problem that was showing abnormal values in the result data when the cell was excluded from measurements.
Resolved issues
Fixed a problem that was causing pattern charge/discharge execution times to be reduced in 60 Hz regions.
VER 1.3.2.26
2012年6月21日
Test Condition Editor / GraphViewer
Resolved issues
Fixed a problem with the power limit when test condition files created on a special-order power supply model was being re-edited.
Resolved issues
Fixed a problem with the processing of the Next button when option board data was displayed.
VER 1.3.0.20
2012年4月24日
Test Executive / PFX2512
Resolved issues
Fixed a problem that was causing an alarm when tests were executed without configuring the option board.
Improvement
Ver1.0.2 Changed the humidity calibration point.
VER 1.1.0.12
2012年3月27日
Test Condition Editor / GraphViewer
Improvement
Added a profile master check and repair feature.
Improvement
Changed so that the X-axis can be set for each graph.
